Skip to main content

Improve Your Experience

You are using a browser version that we do not support. Please use one of these supported browsers:

Behind the Meter

power meter

Learn more about the PUD and what we do, how we do it and why, as well as get some tips on conserving energy and staying safe around electricity.    

Selected Story


This is Part 1 of 5 regarding the energy usage costs of common household items. The more we realize how much energy we use, the more we can find ways to save energy and save money!

We start our series with the greatest of all energy consumers – heating and cooling systems. This will be the largest portion of the energy charge on most bills.

Perhaps we don’t think about it each time we turn up the thermostat, or add one more space heater in the house, but it all adds up. For example, the average home’s electric furnace costs about 58 cents/hour to heat the home. That might not sound like much, unless you multiply the number of hours per day that furnace is running (let’s say 10 hours), then multiply that by 30 days (average billing period). Suddenly, that furnace just cost you $174 in a month.

Solutions: 1. Turn thermostats down a couple more degrees – a few degrees can save a few percent on your bill. 2. Make sure your system is maintained annually to run at its most efficient. 3. Check for any air leaks around windows or doors and seal them up. 4. Insulation is critical to help heating and cooling systems work their best.

Home weatherization is one of the biggest factors in determining how much energy a system uses to keep a house warm in winter (or cool in summer). The same HVAC system in the same square-footage will cost different amounts of energy/cost depending on the home's insulation, air leakage around windows and doors, etc. 

Little known fact: The second biggest consumer of electricity in your home is your water heater. With average use of a standard 4,000W electric water heater, it’s about $26 of a monthly bill.

Solutions: 1. Make sure the thermostat is not set above 120 degrees – not only will this save you energy, but it’s safer for use! 2. Take shorter showers – just a few minutes shorter can add up per shower. 3. Use cold water in your laundry rinse instead of hot or warm water – this can make a huge difference (more on appliances coming up).

If you are looking at upgrading either of these big energy consumers, we have incentives for ductless heat pumps and heat pump water heaters. Find out more on our Energy Services pages.

Heating & Cooling PDF

More News Articles

Aside from our more popular energy efficiency incentive programs for homes and businesses, we also have agricultural and industrial incentive…

If you are a PUD customer and would like to increase the energy efficiency of your business, we have incentive programs available that could help…

If you are a PUD customer and interested in making your home more energy efficient, we have incentives available.

Your primary source of…

While you are at home and may be concerned about energy usage, you can do a basic energy audit to identify problem areas. You can then make…

Project Help is a long-time program at Okanogan County PUD, funded entirely by donations from our customers. The fund goes to customers…

Did you know that Okanogan County PUD does not generate any of its own power? We buy all the power that we sell to our customers – and it’s nearly…